Accessibility is easy to miss on a drawing and expensive to fix after a failed inspection. In a commercial space it’s the law. The good news: you can walk your accessible paths at full scale and catch the problems in design, where they’re cheap to fix.

An accessible ramp with handrails

What ADA asks for

  • Turning space. A wheelchair needs room to turn, generally a 60-inch circle or a T-shaped space. It’s easy to forget in a tight restroom or a narrow hall.
  • Accessible routes. A continuous, unobstructed path connecting the spaces people use, with adequate width.
  • Clearances and reach. Room to pull up to a counter, sink, or fixture, with controls within reach range.
  • Door widths and approach. Enough clear width and maneuvering room on both sides of a door.

Walk it with a real wheelchair on site

Numbers on a plan are one thing. Moving through the space is another. We project your layout at full one-to-one scale and keep a wheelchair on site, so you can physically roll it through the projected space, turn it in the restroom, approach the counter, pass down the hall, and confirm every guest can get where they need to go. Catching a too-tight turning radius here costs a conversation. Catching it at inspection costs a rebuild.

An honest note on scope

We help you see and confirm accessibility at true scale, it’s the check that catches the problem in design, not in a failed inspection. It is not an ADA certification or inspection service, and it doesn’t replace your architect’s or a certified access specialist’s sign-off. It makes their job, and yours, a lot easier.

Building a commercial or public space? See how a full-scale session works, or tell us about your project.

More from the blog  ·  Who we serve